b318isp Posted April 11, 2011 Report Posted April 11, 2011 Can anyone recommend a good fault and cheap code reader for the Mk3? I have a fault on the rear reversing sensors which I'd like to diagnose, so it must do the whole car (like VAG-Com). Unfortunately, it seems that each sensor cannot be diagnosed by listening to it, as per the Mk2. Quote
dix Posted April 11, 2011 Report Posted April 11, 2011 Hi ,There doesnt seem to be a cheap reader for fords as they use WDS which apparently is their own system you can source code readers from China but again about 600 dollars ,i have the Vag Com 10.6 for my mk2 but i find it doesnt read all the vehicle ECUs. Quote
b318isp Posted April 11, 2011 Author Report Posted April 11, 2011 Hi ,There doesnt seem to be a cheap reader for fords as they use WDS which apparently is their own system you can source code readers from China but again about 600 dollars ,i have the Vag Com 10.6 for my mk2 but i find it doesnt read all the vehicle ECUs. Cheers. I have VAGCom too, is there any chance it would talk the car at all? Quote
chrispb123456 Posted April 11, 2011 Report Posted April 11, 2011 Hi The MK1 & 2 are Volkswagen Audi Group,except the 2.0 and 2.3 engines as they are Ford engines. The MK3 is all Ford Quote
glam Posted April 15, 2011 Report Posted April 15, 2011 (edited) FoCOM? Edited April 15, 2011 by glam Quote
Smilge Posted April 18, 2011 Report Posted April 18, 2011 I use an Autel Maxiscan MS103. Does what I need ........ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.